Track Rollers FR35 FR35Z Bearing

Inner Diameter: 17 mm

Outer Diameter: 107 mm

Inner Thickness: 84 mm

Outer Thickness: 60 mm

Seals: Rubber shield

Product Details

Track rollers for Vee bars/Plain rollers - type FR

The backlash setting and the pre-tensioning of the rollers takes place via the eccentric hub of the rollers of the series FR
The FR..Z series are the concentric models. In the eccentric rollers, the inner bolts are provided with two holes. These allow for the adjustment of the backlash. If a roller is located in its zero position, the teeth backlash will be the standard value of 0.05 mm flank clearance.
The service life of the system will be reduced by excessive tensioning. With too little tension the rollers will not run, or will wear due to the poor meshing.

1030 - Got error 28 from storage engine

select distinct p.products_id,p.products_image,pd.products_description,pd.products_name from products p left join specials s on p.products_id = s.products_id, products_description pd, products_to_categories p2c, categories c where p.products_id = p2c.products_id and p2c.categories_id = c.categories_id and c.categories_id = '11' and p.products_status = '1' and p.products_id = pd.products_id and pd.language_id = '1' and p.products_id !='94' order by rand() limit 4

[TEP STOP]